Camping stove for 190g pierceable gas cartridge LC-75

Description:
Portable vapour pressure gas stove for used in well-ventilated area only,it’s designed for use with content 190g pierceable butane gas cartridge complying EN417-type 200(TUV type approval 02 I 99),the pierce pin with rubber seal at the gas inlet is designed to prevent any gas leakage.the gas inlet is fixed to enclosure for cartridge use a screw nut.The regulator is fitted to the appliance combined to the gas tap after the gas inlet.the gas tap is a needle valve with variable position.it’s fitted with a single pan support with four fingers.

Material:
Steel stove plate and section,stainless steel burner,brass valve,metal container.

Technical data:
Category:Direct Pressure- Butane.
Single burner,single injector(0.24mm).
Inlet Pressure:Vapour/Direct Pressure.
Burner type:Stainless steel Ring Type.
Ignition:Manual ignition.
Power:1.1kW,Consumption:80g/h

INSTRUCTIONS FOR USE

SWITCHING ON:
-  Turn the adjusting knob,one turn in an
   anticlockwise direction .
-  Light the gas immediately at the burner, with a
   match or a lighter
.
ADJUSTMENT
-  The flame is adjusted by turning the adjuting
   knob.

PUTTING OUT
-  Turn the adjusting knob, clockwise  until
   completely closed.

CAUTIONS

  The gas cooker must be used in a well-
ventilated area,away from inflammable
materials or substances .
●  The gas cooker must always be placed on a
    steady, flat surface at a safety distance from
    walls or other objects.
●  Once the gas cooker is lit, let it warm up for 30
    seconds. If the gas cooker is not completely
    warmed up or moved brusquely it may flare
    up. If this happens, keep the gas cooker in a
    vertical position for a few seconds .
●  When lit, the gas cooker should never be left
    unsupervised.
●  During use, parts of the gas cooker can reach
    high temperatures. After putting it out let it
    cool before handling .
●  It is dangerous to use damaged or incorrectly
    functioning equipment .